Bath & Kitchen Counters
Parent Q&A
Archived Q&A and Reviews
| Questions about choosing counter materials | Advice about Specific Materials |
'Green' Kitchen Counter material
Sept 2012I want to replace the counters in my kitchen with a heat-resistant, stain-resistant, easy-care eco-friendly material. I don't want to have to seal them or do any special deep cleaning. The material has to be hard enough to withstand scratches and dents and not chip, so soapstone is out.
Don't want Vetrazzo or anything like it because it is 'too busy'. Has anyone used Richlite, Icestone, Paperstone, Squak Mountain, Silestone, Caeserstone, or bamboo? What do you like about your countertop material? What don't you like about it?
What source did you use to get your materials? Who installed them for you? Would you recommend that person? If so, I'll appreciate getting their contact info. Thank you, barbara
We just put Ceaserstone countertops in our kitchen and bathrooms. We absolutely love them! I really can't think of any downsides. They look great, clean off easily, and, so far, have not been damaged by my very careless husband, son or brother-in-law. We got the polished finish because it holds up better than the honed finish. We used Sullivan Countertops in Oakland and they were great. Super professional, on time, and they did exactly what they said they would. We got a square edge with a 2' overhang (rather than a typical 1 1/2') and it looks unbelievably amazing. We stuck with neutral colors go that the countertops won't look dated in a few years. Ceaserstone Lover
go to Sullivan's Countertops in Oakland. They have everything in terms of countertops. I know many people who have used them. Prices are good, service is great. just had new countertops
We started out looking for a green countertop and caesarstone was recommended by two stores. By the time we were ready our budget was Corian so we got one with post-consumer recycled content and we love it. Sullivan Countertops sold and installed it. We got a great price and the installation was almost perfect (one tinty scratch that was covered by the tile backsplash that Sullivan would have repaired if it hadn't been covered). Sullivan also sells quartz countertops, although we went there to check out Corian on the advice of an appliance installer who said they were the best Corian installers. There were customers there looking at quartz as well. They are on 65th at San Pablo in Oakland. Their salespeople can give you a quote from drawings and a rough measurement by e-mail. The man who came out to measure was extremely thorough and told us what type of faucet would work with the countertop. Good luck with your search! Anon
We installed Squak Mountain countertops in our kitchen a year ago. Although they look(ed) wonderful and we like the feel of them, I would highly recommend against using them. We were prepared for them to need some care, along the lines of wood countertops, but they stain incredibly easily; a drop of water left on the counter for a few minutes leaves a mark. They also are quite soft and chip/scratch easily too. We take good care of them but even after a year they're full of watermarks and scratches. If I had to do it again I'd use butcher block with some kind of stone around the sink. choose carefully!
Alexandra Sheets Saikley is a green architect. I have seen before and after photos of many of the homes she has worked on, including her own. She specializes in green living and understanding exactly what her clients would like. I would turn to her for advice and/or to contract. She has also designed restaurants - so i imagine she knows kitchen materials very well. 510-749-0675 www.asarch.org Tara Williams
Recycled glass countertops
April 2008I'm looking at recycled glass countertops, and want to hear from anyone who knows about this technology. I like the look, and the sustainability. Some seem to be mixed with concrete, while another said it was glass and porcelain. Can anyone comment on the differences? Do these need to be sealed? Do they scratch? Are they long-lasting? ANYTHING you can tell me here is appreciated. I've looked in the archives, and have not seen anything specifically about recycled glass counters.
http://www.vetrazzo.com/
This might be of some help. anon
Black honed granite vs. soapstone
Oct 2006We live in a fairly high end house in Lamorinda. We are thinking about updating our kitchen and are trying to match new perimeter countertops to a pretty busy granite pattern that is currently on the center island that we don't want to replace. It's hard to find a granite color that matches without being too busy so we've narrowed it down to either a black honed granite or soapstone. Does anyone have any experience with either a dark honed granite or a soapstone countertop? I'm a little conerned about the upkeep of the soapstone (needs to be wiped with mineral oil regularly) and heard that it chips pretty easily. Also in terms of resale value will people think it's too weird? Haven't heard much about honed surfaces one way or the other. Any comments about either surface appreciated. Thanks
I also live in Lamorinda and just had granite countertops installed. I loved the look of honed granite, but was recommended away from it, because the honed finish shows fingerprints (and basically anything else with oil on it), and will almost always look mottled and/or dirty. I was not thrilled with the polished look, but eventually was swayed by the fingerprint issue. Go view some honed granite slabs and put your fingers on it - you will see right away. I don't know anything about soapstone, unfortunately. All the kitchen design magazines lately mention that having a few different countertop surfaces is all the rage, and doesn't look weird at all. If you like the ''honed'' look, you might want to consider concrete - I believe it is in the same price range, and you can have it stained in a color that compliments your existing granite well. Good luck! Sherry
We recently remodeled our kitchen (new cabinets, appliances, and countertops). We chose a honed dark green slate countertop and it looks great. We looked at the non-honed and it was too rough for our taste. Our neighbors re-did their kitchen recently as well and they chose a black honed slate countertop. Slate looks great, costs the same or less than granite, and holds up well. We are supposed to oil it occasionally but we haven't had to do it yet and it's been several months. Love the slate
Soapstone is not recommended for kitchen countertops since it is so soft, absorbs everything and scratches easily. It will not enhance your resale value. Honed granite is a little harder to maintain than polished granite and shows hand and grease marks that need to be cleaned up regularly for aesthetic reasons. Beware that some cheap black granite from China is not granite at all but is a stained, painted and polished base stone that you will regret purchasing. I recommend that for the best information you visit Point Richmond Granite on 250 South Garrard Blvd, Richmond CA, one block off 580 going toward the Richmond Bridge at the Canal Street exit. Telephone 510 307 7800. They have beautiful colors that will probably match well and can give competent advice. Good luck! Loves my granite countertops!
We are also working on remodeling our kitchen and I have done a lot of research into both soapstone and the black granites, including black honed granite. Re: soapstone, yes it does chip and scratch easily, but it also depends on the type of soapstone you choose. There are many different kinds out there and they can really range in look (dark green to fairly black, lots of veining or very little) and in how hard they are (easily scratched vs. fairly hard). There is a soapstone place in SF that you should check out before you decide. I really liked the look of soapstone, but my husband didn't. Soapstone is very popular right now, so I don't think that people will think it's weird. It has a very old fashioned, farmhouse feel to it. About the black honed granite, I would advise against it. I have heard horror stories about the upkeep of honed black granite (not all honed granite, just black). People complain about the maintenance, as it shows stains and fingerprints (oil on your hands) and you can't get rid of them. If you like the look of a matte black granite, look into the black granites that are ''antiqued'' or have a ''satin'' finish. They are treated differently (stained and resined?) and have a deeper, richer color than the honed black, which looks grey, and are easier to maintain. Most importantly, go out to slab yards (there are many in the San Leandro area) and look at them, touch them, and ask about how they wear. We ended up going with marble (talk about maintenance!), but I just love the look of it. Good luck! MK
We put in soapstone counters when we remodelled our kitchen 3 years ago. We live in a 1912 Craftsman so we were looking for something that fit with the style and time of the house and didn't look too slick or modern. I'm really happy with them. We used a Brazilian soapstone that is a deep slate color with grey/green veining. Most people think it's marble. It looks beautiful with the original fir floor and trim in the kitchen. It does not stain or absorb spills, etc. You can spill wine on it and just wipe it up with no staining. However, soapstone is soft, and as time goes by it become covered in a network of fine scratches, so if you are looking for a smooth unbroken surface, this is not the material for you. I like this effect because it makes the counter look like it's always been there. Soapstone can be sanded and smoothed out if desired. I do occasionally oil my counters, which deepens the color and makes them shiny for a couple of days. G
We have soapstone countertops and love them. They have a really lovely quality that is different from the honed granite I've seen--hard to put in words but I think it's a more organic, natural look. They do scratch, but those easily go away with a wipe of mineral oil. We have not applied mineral oil regularly, just as needed for spot applications, and they look great. (The fabricator did pre-oil them). No problem with chipping-we had a few very small ones around the sink edge, but again, a touch of mineral oil and you don't notice. I think the small amounts of wear are what gives it that natural look. And they don't stain at all, which I understand can be a problem with honed granite a soapstone fan
Pros and cons of various surfaces
Jan 2005I will be remodeling my kitchen. I have looked at Corian, Silestone, and Zodiac stone. I would to hear pros/cons about any of these substances. I like corian because it is seamless, but I know it is a softer material than Zodiac stone. Also, who or where did you order your counters from. We live in Berkeley and would like to use local companies if they have reasonable prices. thanks dmr
For the person who was wondering about countertop materials, we remodeled our kitchen a year and a half ago and went with Corian for the majority of the countertops. Like you, I loved the seamlessness of the material. I love that our sink can be cleaned perfectly (no lines where sink joins countertop). HOWEVER, our Corian hasn't worn that well. I already see scratches and sometimes it's hard to clean the countertops perfectly. They just don't look *sparkly* clean even after wiping them down or even spraying them down. I know people say that you can get someone in to sand out the scratches, but come on, who's going to do this on a regular basis?
We also built an island and used Zodiac for that. I thought I wouldn't like the Zodiac as much as the Corian, but now I love it even more: cleans well, wears well (no scratches anywhere) and just looks great. Next time around I might forego the seamlessness and go all Zodiac.
As for where to get these made, we went to Sullivan Countertops in Berkeley off San Pablo and really thought they were fantastic. The owner, Tom, was a huge help. Good luck! Zodiac convert
July 2004
We recently underwent a major kitchen remodel; I offer the following in response to recent postings.
Zodiac: we chose it because it comes in bright colors (we have red). I got about 7 estimates, and Sullivan Countertops was the cheapest. I think they did a good job. The one surprise is that the counter is not really polished in the same way as granite ones are, and it really shows dirt, water marks, etc. To keep it looking nice, I have to clean it with some kind of cleaner or soap, and wipe it dry it with a towel. Just wiping with a dish sponge does not really do the job. If you just want a natural stone color, I would say go with granite. It you want bright red or blue, you have reason to go with Zodiac.
2001
Can anyone provide input regarding the pros/cons of the various surfaces available for kitchen counters (tile/Corian/marble/granite)? We currently have tile, but need to replace it. I love the idea of a single surface (as opposed to tiles with the concommittant plague of dirty grout)--but I think I'd miss being able to put my hot dishes down. Is corian a good product? Does it wear well? Are marble or granite worth the significanlty extra cost? Thoughts/experiences would be greatly appreciated.
I don't know much about the various materials, but I can give you a GREAT source for really inexpensive granite: Best Tile in San Francisco. It has a limited selection of granite, but if you like one of them, it's an amazing deal. The pieces are pre-cut and shipped from China (so politically incorrect). You buy sizes that work for you and have a specialist cut them to fit and install them. We spent about $2,000 on granite for our fairly large kitchen--it would have been around $12,000 through other sources, we understand. -Rachel
With regards to the Kitchen Counter Surface. I have Granite and I love it. You can still place hot pans and such directly on the surface. It doesn't show any dirt, it always looks clean. It is the most durable surface I've ever had. Marble is a softer stone than granite. It stains and etches very easily. It is very good for bathroom countertops. Corian is a hard plastic and you can not place hot pan on the surface as it will burn. I also may be a bit biased since my husband is a granite/marble fabricator. If you decide on granite or marble and would like a bid from him, his work number is 510-215-1866 -Carole
I went with Granite on my counters and I love it. You will find that granite is not that much more expensive than Corian. It's tough nice to the touch and let's face it they first came out with Corian to imitate granite. My parents remodeled 4 kitchens with Corian and then went to granite and like it better as well. They claim you can sand out Corian. A friend of mine accidentally put down a hot pan on her Corian and had it professionally sanded out. It always bothered her that she could still see a ripple in her counter. As far as marble goes stay away from it for a kitchen counter it's far softer than granite and can stain easily. -Rebecca
My husband and I built a home last year and selected granite tiles for the counters. At first we were certain we would use ceramic tile, but then changed our plan when we found some very pretty granite tiles at about $5-6/sq. ft. (at Sacramento Tile in Pacheco). This was actually less expensive than a lot of tile we looked at, much nicer, and much, much less expensive than a slab of granite. The granite can be installed with very narrow seams and from a distance looks like a single piece. We chose a grout color to match the main color of the granite, which is a tan/peach(?) shade. We have spilled coffee and other dark liquids on it numerous times and nothing has stained the grout (we didn't seal it, but that would offer more protection). I prefer the tiled look over a large continuous surface (for most kitchens), and thought that Swan Stone (?) and Corian products look plastic-like (depending on the color). I was also surprised to see that many kitchens in remodeling brochures used granite tiles instead of a slab - so I guess it is an acceptable alternative. Marble is not something to consider for kitchen counters, better to use it on floors and bathrooms. One more thing about granite - the side that is on the front edge of the counter needs to be polished so it is rounded. It can cost between $5-10/tile for polishing (e.g. if you have 20 linear feet of counter to cover, 20 tiles need to be polished, so plan on $100-$200). The tiles behind the front row don't need polishing, and corners need to have two edges polished. Well worth it for the value it will add to your remodel! -Susan
I am a big fan of granite slab, even though it is one of the most expensive surface options. We put it in the kitchen we remodeled in Berkeley, and then in the bathroom in our second house. It is maintenance-free, and if you pick the color right, it always looks clean (even when it isn't). I am pretty sure you can put hot things down on it (though I didn't). It also is gorgeous, makes the kitchen look elegant, and probably won't go out of style. The only downside we found is that it is very hard and so unforgiving if you drop things (glasses, plates, pottery) on it or knock things into it. Good luck. Leslie
I love my new corian! Super easy to clean and always looks great. Don't cut directly on it, though, as it will scratch. If you use Sullivan Countertops to install, they give you a good size finished peice that you can use for cutting and putting hot stuff. I was told you can put hot plates down, but perhaps not something right out of the oven. I haven't experimented with that, finding it easy to use the additional piece, a cutting board, the stovetop or my kitchen table. Compared to tile, it's a dream.
Lowering kitchen counters
Sept 2005My mother in law has just bought a house with tiled kitchen countertops which are a couple of inches thick. This isn't a problem for the taller people in the family, but there aren't many of them and she particularly has difficulty working comfortably in the kitchen. Apparently the previous owners built them this way to accomodate a small and quite deep feature tile in the design.(genius) The cabinets are in great condition and are attractive, so she'd rather not replace the entire kitchen. What are her options. Has anyone ever had counter tops lowered? Is it possible? if so what was your experience? Is it simply too much trouble - should she just replace the counter tops entirely? Any advice welcome.
for the person with the thick tile countertops that make the counter too high: are you sure that it's only the thickness of the countertop that's making it too high? A couple of inches doesn't sound like that much, and any countertop will be at least 1 inch, so replacing the tile might not make enough of a difference. Most kitchen cabinets are not sitting directly on the floor; they're on a little - what's the word - pedestal or riser, and when you install them you can choose the height of the counter by how high the pedestal is. You can see how high the cabinets were originally raised off the ground by how high the toe space at the bottom of the cupboard is. (My counters are low -- 35 inches -- and you can't even get your toes (or a broom) into the space at the bottom.) I don't know what would be involved in taking the cabinets out and reducing or removing the riser, but if it's not too complicated, that might be your solution. Jenny
Concrete Countertops
April 2005I'm thinking of installing concrete countertops in my kitchen and am looking for recommendations for a contractor. Catherine
The best in the area is Concreteworks Studio in Oakland near International Ave. Their showroom is substantial and everyone very knowledgeable. You choose what you like, then they will come to your house to measure. Call for an appt. with Betsy or Mark. 534-7141/ 835-9031 Christina
Jan 2005
I am interested in having concrete countertops in my new kitchen. The archives don't list any recommendations for folks who do this work in the area -- I would be interested in folks who specialize in this work rather than general contractors. Thanks much. Rachel
I would try Karl Mulligan for bathroom/kitchen concrete counter tops. He is a general contractor by profession. I know that he has scaled back his jobs/hours to spend more time with his son, but I believe he's still working on smaller, craftsman/artistic type projects like this. He can be reached at 415-871-8398 and can provide excellent references. Leslie
March 2003
I would like to have concrete countertops installed in my kitchen. I have spoken with several concrete specialists in the area, but would like to get some other recommendations for concrete countertop artists/contractors. Also, if you have concrete countertops, please tell me how they've held up and what you like and dislike about them. Kira
we just did floors & countertops in kitchen & shower/tub in bathroom. The range of prices & tech is all over the board, some make molds at their shop & install large pieces, but we wanted concrete for the seamless look not a tiled look. We found one to pour in place for decent price. This is our 1st remodel & our contract didn't specify a finish date or discount. Contractor said would take 2 wks to finish, & took over 14. More unhappy with work ethic than actual job. Workmanship was OK. I love floors, counters are ok, not the color I picked, but job took so long I no longer cared, just wanted it done. Keep in mind, that the finished product is completely dependant on the workmanship, supposed to be a bit rough & the coloring process is COMPLETELY dependant on the contractors artistic ability, his interpretation of what you want & the how concrete takes stain. Look very closely at the contractors whole portfolio for style themes. I have pics if you want to see them, tough to see colors, but may give you an idea. What contractors are you talking with? Brandi
Corian Countertops
Nov 2004I want to install Corian countertops in my new kitchen, but was told that Swanstone is virtually the same as Corian, as far as quality, ease of maintenance, and durability, but costs half as much as Corian does. I heard from someone else that Swanstone has a flimsy feel to it because it is half the thickness of Corian and does not hold up well over time. I would like to hear from people who have used either, or both! Thanks. Karen
Hi. I don't have either that you mentioned, but looked a lot at Corian and it has a great quality which is it can be refinished; you could find out if the same is true for the cheaper one (say 10 yrs. later and you want to sell the house or not pay for new countertops ever again) Our friend, a carpenter, has refinished older corian for clients and says it comes out looking great. (we were priced out of everything so holding out with old ugly formica) Sullivan Countertops (Emeryville) was extremely helpful with lots of info. on various materials and very low-pressure about buying. Chris
Formica countertop
May 2007Need a recommendation for a formica fabricator and/or contractor (not Home Depo). If you have redone your kitchen with formica and have suggestions, please share! Anon.
We used a small family countertop fabricator, Richmond Plastics on Carlson, 234-7701, to replace our kitchen counters and backsplash with Formica about 15 years ago, and are using them again this year. We have to replace the leaky faucet and reseal the sink anyway, plus I now want a medium-dark color with a fake-granite pattern so the dings don't show. They also have quite a selection of manufactured stone countertops, and are great about allowing you to take samples home. Prices quite reasonable. peg
Granite Countertops
March 2007We recently discovered that our new house's granite countertops have not been sealed. We were told that we need to find a professional granite ''sealer'' but some installers won't just do this.. Suggestions please - in the e-bay please. anon
Why would you need to seal a granite countertop? I've always wondered why people do this since I studied geology at college and to me granite is a very hard rock. Do you know what type of rock your ''granite'' countertop is? Not all so-called ''granite'' counter top material is actually made of the rock called granite which mostly contains feldspar minerals (usually white or pink - though can be rarely green) with some quartz (colourless) and dark minerals (black or brown). True granite probably has a melting point above 550 degrees C and is very hard so I doubt that any foodstuffs or anything else might cause damage to a granite surface. However, if your ''granite'' countertop is actually made of limestone or dolomite which is comprised of calcium and magnesium carbonates, it can actually dissolve when in contact with acidic food materials such as vinegar, tomatoes, lemons etc. I would recommend sealing that type of countertop material. As for granite - I really don't understand why people seal it! We have a honed basaltic (black ''granite'') countertop which we have never sealed - and it is still holding up well. Anon
March 2007
We are looking for a reliable and affordable person or company to restore our kitchen granite countertops. We need to have the seams regrouted and we would like the finish to be buffed up to its best shine. Thanks in advance for your referrals. We have had a hard time finding anyone to do this work. barb-lee
I highly recommend Armando Freitas 510.432.3070. I really liked him and he was recommended by a stone place. We used him to remove a HUGE rust stain in our stone counter. He was extremely knowledgeable - he told us that the rust remover chemical would burn/etch the stone and that it needed to be sanded out. We decided to do the work our selves and he told us exactly what to do. andrea
March 2007
We just had our granite counters cut & installed by Wen. Not only did he do a good job, he was also reasonably priced, picked up our granite for no extra cost and is a very pleasant and hardworking young man. He also does flooring. You can reach him at: wflooring[at]gmail.com julie
Feb 2007
Re: Feedback on kitchenworks.com or homeworks.com?
I'd recommend a company we used for granite countertops called Kitchen Experts. These people used to work for Kitchenworks and they are about half the price. They were still more expensive than going directly to the granite yard on your own, but they did do good work. Their number is (925) 362-8200. Judy
Oct 2006
We recently had our granite kitchen counters installed by Gillman Granite 510-763-8313 and they did a fantastic job. He and his stepson do the work themselves, and do meticulous work. He was very responsive and his price was reasonable. He is also a sculptor and loves stone, which comes across in his work. I highly recommend him! Monica
Jan 2006
We remodeled our kitchen, bathroom, and added fireplace surrounds. We used a great granite installation company called Geological Designs (owner is a soft-spoken, easy- going artist/craftsman). They returned calls promptly, showed up to the site and completed the work as promised. We had no problems. After being introduced, they worked directly with our designer/contractor to complete the job. Contact info: Rodney at Geological Designs 510.910.5537 cell or 510.763.6221 office. Email: Rodney[at]geologicaldesigns.com Web site www.geologicaldesigns.com
Julie Nov 2004
We are looking for a good place to get granite countertops and installation for our kitchen-I have looked at the old listings and there is very little. Any suggestions? Monica
I would like to recommend Sterner Marble and Granite for you kitchen countertops. They will fabricate and install. They are professional and do a great job! You can reach them at 510-215-1866. Carole
We just put in new granite kitchen tops and used Creative Stoneworks. Laura was the person who helped me and she was so wonderful. She was very patient with me (I changed my mind alot!)and the crew was very professional and did very quality work. I would highly reccomend using them. They have a small stock of granite at their wharehouse to chose from at excellent prices or you can pick your granite out elswhere and have them fabricate it. There number is 510- 428-2202. Good luck! anon
May 2004
Hello -- Can anyone recommend a granite fabricator that does good work at a decent price? I've looked in the archives and there isn't anything current. Thanks! Also, we like the matte or honed surfaces and are considering honed granite, slate, fireslate... any opinions out there on matte counters? Thanks again! confused by counters
I have recommended in the past Sterner Marble & Granite and I will recommend them again. Yes the owner is my husband but he's been Fabricating Granite for years and he does it well. With regards to Home Expo, we were in there a month or so ago and my husband said there displays were pretty good, but they were pretty expensive. Not a whole lot of Granite to choose from either. It doesn't cost anything to get a bid. I would encourage you to do so. SM does a lot of work through out the bay area. They can be reached at 510-215-1866. You won't be disapointed!! Carole
We used Expo's kitchen design services in Emeryville but decided to use other sources for the granite and tile because of price (fyi, granite prices at Home Depot are the same). For the granite, we decided to go with a source that did prefabricated granite counters, meaning they have pre-cut lengths of countertops that work with all standard sized cabinets. Price includes a bullnosed edge. The only thing is that you are limited to two styles of bullnoses (which in our case wasn't a big issue since we liked the styles they had). We found the exact style of granite we were looking for (they have a wide selecton). It took them a week to install it, compared to Expo's 6-8 week estimate. We saved about a thousand dollars on our counters. They go by two company names: Amazing Stone (www.amazingstone.com) and Heng Seng (or something like that). They advertise extensively under the latter name in the Home and Garden section of the Chronicle. They are located in San Leandro. They were quick, friendly, and the prices were really good. For tile purchase and installation, we used the Floor Store in Richmond (on Jacuzzi St. off 80). They contract out the work to tile installers. We did our floors and the backsplash. We again saved a lot of money compared to Expo and were very satisfied with the results. mishmasch
I have a recommendation for an excellent contractor who specializes in granite countertops, tiles, etc. as well as honed stone. He does excellent work and is a great bargain. I have used him for granite countertops, slate bathroom installation, and other smaller projects. He is very reliable, shows up when agreed upon, and best of all - works extremely fast, which is always a plus when you are remodeling and want contractors in and out as fast as possible. His name is Dimitar and his number: 925-285-7643. Good luck! Milena
April 2004
Hi - Does anyone have recommendations (or places to avoid) for a) obtaining at a 'reasonable' price, and b) cutting and installing granite counter tops, for the kitchen and bath. We saw the earlier posts on the web site, but are looking for more recent recommendations. Where did you get yours, and who installed them? How did it compare price-wise to Corian or other solid-surface? For those who have installed granite counter tops in previous years, how are you finding them as far as look, wear, etc.? What alternates did you consider, and how did you decide on granite? (are you glad you did). Any advice or recommendations will be appreciated. Poised to remodel
We put granite coutertop on our last house because we knew we were going to sell it and that's what was recommended by our contractor for best resell value. We ended up loving it. We are now remodeling our current house and will have granite countertop again. We are using Glenda (925 454- 1497). She works from her home and beat all prices we got directly from manufacturers. She is fast, efficient, came to our home in Oakland on Friday evenings. Definitely worth a call. Also to convince yourself wether you like it or not, go to a granite/marble provider and look at slabs. You get a better feeling about the material that way. Good luck
Dec. 2002
I''m giving my kitchen a ''facelift'' rather than a complete remodel and need some advice on a couple of things. I will be getting a granite countertop and would like recommendations on places to get a ''good deal''. I checked the archives but there was only 1 place recommended in SF. Has anyone used Home Depot for this??
My husband is a granite fabricator, and although I my be bias, his work is exceptional. The name of his company is Sterner Marble & Granite. I suggest you get a least a few bids and ask for references. I have heard some not go great stories about Home Depot. You can reach SM at 510- 215-1866. Carole
July 2002
Where can one purchase uncut granite slabs to be used as kitchen countertops? I've heard that this is less expensive that buying pre-cut granite. sukell
We got our granite from a company called Integrated Resources in South San Francisco (near the airport). www.marblecompany.com. They were reasonable (as far as granite goes) and had a HUGE selection of slabs in a warehouse with a variety of prices. They won't quote you exact prices, as they only quote to the granite/marble installer (your contractor or subcontractor that is going to pick up and install the slab) but they can give you ballpark numbers. Note, the installation can be as much or more than the material as it's a highly specialized trade. If you don't have someone to install for you, they can give you recommendations of contractors. Walker-Zanger in Hayward is pretty big and (seem to do a high volume)has a similarly set up warehouse. Ndaetz
My husband is a granite fabricator (Sterner Marble and Granite) with his shop in Richmond. He has slabs at his shop that are left over from jobs that he would sell, depending on how much you need. You could call his office (510-215-1866) and they will give you names of places that just sell uncut slabs. I know of one, Alpha Marble and Granite. There in San Leandro. Hope this helps. Carole
Limestone Counters
Sept 2011We are redoing a bathroom, and I'm really struggling with what materials to use. I have a crema marfil marble countertop in one of our bathrooms, and while I love the look, it started to get these little spots on it (look like water spots), and I don't want to go through that again. So I found a Silestone countertop that looks similar. Does anyone have experience with Silestone? Or is there another countertop material similar to marble that is more stain resistant? Also, I found a honed limestone tile that I would like to use for the bathroom floor (including shower floor), but I'm wondering if that will require a lot of maintenance and have the same kind of issues that I'm having with the marble. Anyone out there use limestone in their bathroom? Or is there another natural stone that would be a better choice? Design Challenged
about 4 years ago we installed the most beautiful limestone as the floor and the tub surround in our small bathroom
pros: the limestone is really beautiful
cons: It quickly becomes stained, spotted and is almost impossible to clean
It is VERY slippery when wet! I think it would be a bit of a death trap in the shower!
it cracks easily! one of the large tiles, which is right by the door, became badly cracked almost immediately
So I would have to say, don't do it! been there, done that
Silestone Counters
Sept 2011We are redoing a bathroom, and I'm really struggling with what materials to use. I have a crema marfil marble countertop in one of our bathrooms, and while I love the look, it started to get these little spots on it (look like water spots), and I don't want to go through that again. So I found a Silestone countertop that looks similar. Does anyone have experience with Silestone? Or is there another countertop material similar to marble that is more stain resistant? Also, I found a honed limestone tile that I would like to use for the bathroom floor (including shower floor), but I'm wondering if that will require a lot of maintenance and have the same kind of issues that I'm having with the marble. Anyone out there use limestone in their bathroom? Or is there another natural stone that would be a better choice? Design Challenged
We remodeled our kitchen several years ago and used Silestone. It still looks new and hasn't gotten any stains, as far as I can tell. We have the dappled design so it actually hides dirt a little too well -- crumbs & stuff -- but that shouldn't be a problem in a bathroom. Easy to clean, too. happy with Silestone
Soapstone Counters
Nov 2006I'm planning a kitchen remodel and I'm intrigued by what I've read about soapstone countertops. They sound like a really nice alternative to granite & like they would look good in a simple, traditionally styled kitchen. Does anyone out there have soapstone countertops, and if so, have you been happy with them? Sounds like there is a lot of maintenance at first as far as oiling them, but does the need to oil them decrease over time? Have your countertops aged nicely? Thanks for the help, appreciate it. Kathy
I posted a very similar question a year ago when we were getting ready to do our kitchen remodel, and did not get any replies. Guess soapstone has gained ground in the last year or so! We ended up going with honed verde butterfly granite; a dark green/black. I can tell you that most of the comments posted about honed granite and what people have ''heard'' are incorrect. I am very happy with the honed granite, but I loved the look of soapstone too. For an excellent source of information, check out the Garden Web forums at http://ths.gardenweb.com/forums/kitchbath/#. Do a search on ''soapstone'' and you will find an incredible amount of information. There are also links to the finished kitchen blog that someone put together to show off pictures of completed kitchens that have been posted, and are also very helpful when you are planning a remodel. Claire
Hi, We finished a complete kitchen remodel one year ago and installed soapstone countertops. They are gorgeous. Very earthy, no shine, matte finsh with beautiful veining. We adore them. Soapstone is really interesting too, it is the most dense material available, and is made into talcum powder too (!?!)
They need to be oiled intensively in the first few weeks, and then not at all after that, although if we are having a party we do oil them the day of because it deepens the color and shows the veining more in contrast. When you oil them, you wipe the oil off entirely and it is still working, but i mention this b/c you will not brush up against them and get oily.
We found ours through M. Texeira soapstone in SF, they are easy to find on line. They are extremely knowledgeable. We cut it and installed it ourselves which saves money, but they will do those things for you as well.
Good luck. Feel free to email if you have more questions. a & e
Stainless Steel Countertops
March 2003We are remodeling our kitchen in North Berkeley and need someone who can make stainless steel countertops. We would appreciate any recommendations or leads. Tienne
I'm putting SS countertops in our kitchen. Here are the manufacturers I've found. Each works a little differently, so it's worth talking to more than one.
American Metal Products 1320 Underwood Ave San Francisco, CA 94124 (415) 822-4100 Walter Mork Co. 2418 6th Street Berkeley, CA. 94710 (510) 845-0992 TGW Metals Inc. 150 West Trident Ave. Alameda, CA 94501 (510) 523-4417 Karen
Check out family-owned and operated Appleby’s in San Leandro. They cleaned and reglazed our marble kitchen and bathroom floors. We were really happy with the process, the crew and the results. IDK if they work on Corian (type) materials, but give them a call!